38
DESN 512400 A
DESN 512393 C
DESN 512400 A
Fig. 15.4
Fig. 15.5
Fig. 15.6
C.
TO REMOVE FACIA CASTINGS
1.
Isolate from electric supply.
2.
Proceed as ‘
TO REMOVE HOTPLATE CASTINGS’
.
3.
Pull off control knobs.
4.
Remove control panel fixing screws (4 per casting) (
Fig.
15.4
). When removing the screws support the casting.
NOTE
: When removing the castings, the oven indicator neons
require disconnecting from the facia, hold the cables at their
entry into the neon twist and pull, this will disengage the
neon assembly. Be careful when refitting facia castings to
position neon and wires correctly.
D. TO REMOVE HANDRAIL
1.
Loosen 2 grub screws, one at each end of hand rail (
Fig.
15.4
) using 2 1/2 mm socket key.
2.
Slide handrail forwards, off locating studs.
E.
TO REMOVE TIMER
1.
Isolate from electric supply.
2.
Proceed as ‘
TO REMOVE HOTPLATE CASTINGS
’.
3.
Remove fixing screws (4). Two top rear and two lower
front of timer housing.
4.
The timer assembly can now be lifted upwards
sufficiently to disconnect electric cables at rear of timer
(
Fig. 15.5
).
NOTE
: Take care to identify cable connections.
5.
Slacken timer fixing screw sufficiently to allow timer
securing strip to slide out of facia panel (
Fig. 15.6
).
6.
Remove timer clamping screw, withdraw clamp and lift
out timer (
Fig. 15.6
).
7.
Re-assemble in reverse order.
