AGA SIX-FOUR DC6 FFD Скачать руководство пользователя страница 28

Страница: 28 / 48

WARNING: This appliance shall be installed in

accordance with the regulations in force and only

used in a well ventilated space. Read the instructions

before installing or using this appliance.

•

Prior to installation, ensure that the local distribution

conditions (nature of the gas and gas pressure) and the

adjustment of the appliance are compatible.

•

The adjustment conditions for this appliance are stated

on the data plate.

•

The data plate is situated in the centre vent slot near the

base of the front plate.

•

This appliance is not connected to a combustion

products evacuation device. It shall be installed and

connected in accordance with current installation

regulations. Particular attention shall be given to the

relevant requirements regarding ventilation (B.S. 5440).

•

It should be in accordance also with any relevant

requirements of the Gas Region and Local Authority.

•

In your own interest, and that of safety to comply

with the law, all gas appliances must be installed by a

competent person. Failure to install appliances correctly

could lead to prosecution.

•

On completion, test the gas installation for tightness.

9. Installation introduction

WARNING: THIS APPLIANCE MUST BE EARTHED.

•

The appliance is designed for the voltage stated on the

data plate.

•

The appliance is supplied with and installed adjacent

to the left-hand side of any one of the current range of

traditional AGA cookers.

•

Installation of the appliance must, therefore, be in

conjunction with the build instructions of the ‘parent’

AGA.

•

Reference must be made to the above Installation

instructions for the ‘parent’ AGA especially regarding

pre-site inspection, not only for both cookers but to

consider any pipework that may pass at the rear of the

Module. i.e. boiler piping or flue duct from a Fan Flue

AGA.

•

The appliance has been designed to accommodate

pipework passing at the rear.

• NOTE! THE MAIN AGA COOKER IS DELIVERED EX-

WORKS, UNASSEMBLED.

• Assembly is undertaken on site by an authorised

AGA distributor.

Содержание SIX-FOUR DC6 FFD

















































Результаты поиска

Содержание SIX-FOUR DC6 FFD

Отзывы:

AGA SIX-FOUR DC6 FFD, Руководство пользователя и инструкции по установке, Страница: 28 / 48

Результаты поиска

Содержание SIX-FOUR DC6 FFD

Отзывы: