31
Maintenance
Maintenance Schedules
Daily
•
Each morning, clean the anvil and also the end bearers of the magnetic cylinder thoroughly and
apply a thin layer of spray lubricant with a cloth to all of these areas.
•
Apply a few drops of oil to the gears of the magnetic cylinder and the carriage rails.
•
Using the Feed button, inch the machine over and clean the entry and exit nip rollers. Do not
wipe these rollers while the machine in in motion.
•
Clean any adhesive residue from the paper infeed rollers, paper guides and anywhere else it
may have built up along the web paths.
•
Check that the mark and look sensors are connected and operating correctly.
Weekly
•
Apply a drop of oil to each of the clutch adjustment know threads.
•
Apply a drop of oil to the thread of the paper carriage adjustment knob.
•
Apply a drop of oil to each of the brass roller carriage ends.
•
Apply a drop of oil to the thread of the slitter adjustment if applicable.
•
Gently clean any paper / glue residue from the paper infeed clutch pads with a dry cloth.
Monthly
•
Carry out a visual inspection of the entire machine to check for any parts that may have been
tampered with, loosened or adjusted improperly and rectify these.
•
Use a mild cleaning detergent; clean the entire body of the DLP-2100.
•
Report any damaged or work parts for replacement.
The following are recommended maintenance schedules to ensure the continued trouble
free running and operation of your DLP-2100 machine. Following these schedules is
strongly advised as they will ensure your machines longevity.
