Read This First
7
•
Keep the machine away from humidity and dust. A fire or an electric shock
might occur.
•
Do not place the machine on an unstable or tilted surface. If it topples over,
it could cause injury.
•
After you move the machine, fix it with the caster fixture. Otherwise, the ma-
chine might move or come down to cause a personal injury.
•
When you move the machine, unplug the power code from the wall outlet
to avoid fire or electric shock.
•
When machine will not be used for a long time, unplug the power code.
•
When you pull out the plug from the socket, grip the plug to avoid damaging
the cord and causing fire or electric shock.
•
Do not handle the plug with wet hands. Doing so might cause an electrical
shock.
•
Keep the machine in an area that is within optimum environmental condi-
tions. Operating the machine in an environment that is outside the recom-
mended ranges of humidity and temperature can cause an electrical fire
hazard. Keep the area around the socket free of dust. Accumulated dust
can become an electrical fire hazard.
•
Place the machine on a strong and level surface. Otherwise, it might fall and
injure someone.
•
If you use the machine in a confined space, ensure there is continuous air
circulation.
•
Do not reuse stapled paper. Do not use aluminum foil, carbon-containing
paper or other conductive paper. Otherwise, a fire might occur.
•
When removing misfed paper, do not touch the fusing section because it
could be very hot.
•
The fusing unit becomes very hot. When installing a new fusing unit, turn off
the printer and wait about an hour. After that, install the new fusing unit. Not
waiting for the unit to cool could result in a burn.
•
Touch only the handles, no other parts. The fusing unit gets very hot and
will burn your hands if you touch it.
•
This machine has been tested for safety using this suppliers parts and con-
sumables. We recommend you only use these specified supplies.
•
Do not eat or swallow toner.
•
Keep toner (used or unused) and toner containers out of reach of children.
•
If toner or used toner is inhaled, gargle with plenty of water and move into
a fresh air environment. Consult a doctor if necessary.
Содержание c7528n
