Aficio c7528n, Руководство по установке

Страница: 191 / 660

Preparing for Printing
51
The details shown in [ Comment: ] , [ Driver: ] , and [ Port: ] vary depending on the
operating system, printer model, and port.
H
Click [ Port: ], and then click [ Add ].
I
Click [ Network Printer ], and then click [ OK ].
J
Double-click the name of the NetWare file server on the network tree.
The created queue is displayed.
K
Select the print queue, and then click [ OK ].
L
Check that the port of the selected printer is displayed in [ Port: ].
M
Click [ Finish ].
The printer driver installation starts.
N
Click [ Finish ] in the [ Component selection ] dialog box.
O
Click [ Finish ] in the [ Introduction complete ] dialog box.
P
In the [ Printers ] window, open the printer properties.
Under Windows XP or Windows Server 2003, open the printer properties from
the
[ Printers and Faxes ] window.
Q
On the [ Printer Settings ] tab, clear the [ Form Feed ] and [ Enable Banner ] check
boxes.
Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, click
the
[ NetWare setting ] tab.
Do not select these check boxes since they are automatically selected by the
printer driver. If you select the check boxes, the printer may not print correctly.
R
Click [ OK ] to close the printer properties dialog box.
❒
The protocol is set to inactive as default. Enable it using Web Image Mon-
itor or Telnet
When using the PostScript 3 Printer Driver
Follow the procedure below to set up the PostScript 3 printer driver.
A
In the [ Printers ] or [ Printers and Faxes ] window, open the printer properties.
B
Click the [ PostScript ] tab.
❒
When using Windows 2000/XP or Windows NT 4.0, click the [ Device Set-
tings ] tab, and then proceed to step to clear the check box.