Aficio c7528n, Руководство по установке

Страница: 205 / 660

Preparing for Printing
65
E
To disable Auto Run, press the left
{
Shift
}
key when inserting the CD-
ROM into the drive and keep it pressed until the computer finishes read-
ing from the CD-ROM.
If Auto Run starts, click [ Cancel ] , and then [ Exit ] .
F
Click [ Browse ].
G
Select the printer driver you want to use.
If the CD-ROM drive is D, the source files of the printer driver are stored in the
following location:
• RPCS
D:\DRIVES\RPCS\WIN2K_XP\(Language)\DISK1
• PCL 5c
D:\DRIVES\PCL5C\WIN2K_XP\(Language)\DISK1
• PCL 6
D:\DRIVES\PCL6\WIN2K_XP\(Language)\DISK1
• PostScript 3
D:\DRIVES\PS3\WIN2K_XP\(Language)\DISK1
H
Click [ Open ].
I
Click [ OK ].
J
Follow the instructions.
When installation is complete, the printer connected to “1394_00n” appears
in the
[ Printers ] window. (“n” shows the number of printers connected.)
❒
If the printer driver has already been installed, the printer icon is added to
the
[ Printers ] window. In this case, printer driver installation is not neces-
sary.
❒
If printing does not work properly after the installation, delete the port and
reinstall the printer driver. For details, see “Printer Does Not Print”, Mainte-
nance Guide.
❒
If you do not want to install the printer when Found New Hardware Wizard
starts under an operating system that supports SCSI print, disable the de-
vice by following the procedure below.
A
When the [ Found New Hardware Wizard ] dialog box appears, click [ Next > ] .
B
When the message “This wizard will complete the installation for this
Device: Unknown” appears, select the
[ Search for a suitable driver for my
device [recommended] ] check box, and then click [ Next > ] .
C
When the message “Please choose your search and installation option.”
appears, clear all check boxes from
[ Search for the best driver in these loca-
tions. ] , and then click [ Next > ] .