Aficio c7528n, Руководство по установке

Страница: 420 / 660

Using a Printer Server
280
H
To create a new print server, press the
{
Insert
}
key, and then enter a print
server name.
For a currently defined print server, select a print server in the [ Print Server ] list.
Use the same printer name specified using NIB Setup Tool.
I
From the [ Print Server Information ] menu, select [ Print Server Configuration ].
J
From the [ Print Server Configuration ] menu, select [ Printer Configuration ].
K
Select the printer indicated as [ Not Installed ].
Use the same printer number specified as the remote printer number using
NIB Setup Tool.
L
To change the printer name, enter a new name.
A name “Printer x” is assigned to the printer. The “x” stands for the number of
the selected printer.
M
As type, select [ Remote Parallel, LPT1 ].
The IRQ, Buffer size, Starting form, and Queue service mode are automati-
cally configured.
N
Press the
{
Esc
}
key, and then click [ Yes ] on the confirmation message.
O
Press the
{
Esc
}
key to return to [ Print Server Configuration Menu ].
P
Assign print queues to the created printer.
Q
From [ Print Server Configuration Menu ], select [ Queues Serviced By Printer ].
R
Select the printer created.
S
Press the
{
Insert
}
key to select a queue serviced by the printer.
You can select several queues.
T
Follow the instructions on the screen to make other necessary settings.
Following these steps, check that the queues are assigned.
U
Press the
{
Esc
}
key until “Exit?” appears, and then select [ Yes ] to exit
PCONSOLE.
V
Start the print server by entering the following from the console of the
NetWare server.
If the print server is in operation, quit and restart it.
❖
To quit
CAREE: unload pserver