Aficio c7528n Скачать руководство пользователя страница 351

Страница: 351 / 660

Monitoring and Configuring the Printer

211

Printer Status Notification by E-Mail

Whenever a paper tray becomes empty or paper is jammed, an e-mail alert is
issued to the registered addresses to notify the printer status.

For this notification, you can make the e-mail notification settings.

Notification timing and e-mail content can be set.

You can be notified of the following events:

• Service call.

• Toner cartridge is empty.

• Toner cartridge is nearly empty.

• Photoconductor unit needs replacing.

• Photoconductor unit will need replacing soon.

• Waste toner bottle is full.

• Waste toner bottle is nearly full.

• Stapler has no staples.

• Fusing unit needs replacing.

• Fusing unit will need replacing soon.

• Maintenance kit needs replacing.

• Paper has jammed.

• Open door is detected.

• Paper tray is empty.

• Paper tray error.

• Output paper tray is full.

• Unit connection error.

• Duplex unit error.

• Hard disk drive is full.

• Development Unit needs replacing.

• Development Unit will need replacing soon.

• Transfer Unit needs replacing.

Set [

Notify by E-mail

] under the [

System

] menu to [

] using the control pan-

el.

The default is

[

]

For details, see

p.171 “System Menu”

Open a Web browser, and then enter “http: //(printer's address)/” in the
address bar.

Содержание c7528n




















































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание c7528n

Отзывы:

Бренды по названию

Популярные бренды

Aficio c7528n, Руководство по установке

Результаты поиска

Содержание c7528n

Отзывы:

Бренды по названию

Популярные бренды