Aficio c7528n, Руководство по установке

Страница: 598 / 660

Troubleshooting
117
It takes too much time to com-
plete the print job. Photographs and other data-rich pages take a long time for
the printer to process, so simply wait when printing such da-
ta.
Changing the following settings may help speed up printing.
• PCL 5c
Select
[ 600 dpi ] as the Resolution under the [ Print Quality ]
tab in the printer properties dialog box.
• PostScript 3
Select
[ 1200 dpi ] or [ 600 dpi ] as the Resolution under the
[ Print Quality ] tab in the printer properties dialog box.
Select [ Fast ] as the Gradation under the [ Print Quality ] tab
in the printer properties dialog box.
Select
[ PostScript (optimize for speed) ] as the PostScript 3
output format under the [ PostScript ] tab in the printer prop-
erties dialog box.
• RPCS
Select
[ 1200 x 600 dpi ] or [ 600 x 600 dpi ] as the Resolution
under the [ Image Adjustments ] tab in the [ Change User Set-
tings ] dialog box in the printer dialog box.
Select [ Speed ] Print priority under the [ Print Quality ] tab in
the printer properties dialog box.
For details, see the printer driver Help.
The data is so large or complex that it takes time to process.
If the
Data In indicator is blinking, data processing is in
progress. Just wait until it resumes.
If the “Warming Up...” message appears on the display, the
printer is warming up. Wait a while.
❒
To maintain optimum quality, color adjustment is regularly
executed during or after printing. Even if printing is not
specified, color adjustment is sometimes executed auto-
matically while the power is on.
It takes too much time to resume
printing. The data is so large or complex that it takes time to process.
If the
Data In indicator is blinking, data processing is in
progress. Just wait until it resumes.
The printer might be in Energy Saver mode. In this mode, the
printer has to warm up before printing can start, and this
takes time. To change how long it takes before the printer
goes into Energy Saver mode or to disable Energy Saver
mode, configure Energy Saver 1 or Energy Saver 2 in the
System menu.
Problem Possible causes and solutions