Afag CR 12, Перевод оригинальной инструкции по монтажу

Страница: 6 / 50

6 CR 12 - CR 16 - CR 20 - BA-vers.4.0 gb 20190630
1.1.1 Intended use
The rotary module series CR 12 / CR 16 / CR 20 is used for the rotary movement of
rigidly mounted loads in non-explosion hazardous ambient and deployment
conditions that are suitable for this module according to these Installation
Instructions.
The CR-module has been built according to the present state-of-the-art and the
recognized rules of technical safety. In spite of that its operation may lead to dangers
to life and limb of the user, damage to property or impair the function of the rotary
module.
NOTE
The CR-modules are exclusively designed for rotary movements in
any position with a torque of 0.45 Nm for the CR 12, 1.25 Nm for
the CR 16 and 2.2 Nm for the CR 20, which may represent a
danger to property and the environment if they are operated by
unqualified personnel.
Any other use is regarded as inadequate.
The manufacturer does not accept any liability for damage
resulting from such use. The risk is that of the user alone.
Intended use also includes paying attention to the Installation Instructions and
observing the maintenance and repair instructions specified by the manufacturer.
CAUTION
The CR-module may only be operated and serviced by
correspondingly trained personnel who have also profound
knowledge of the dangers.
The applicable regulations for prevention of accidents and the
other generally accepted safety-relevant and occupational
safety and health regulations are to be followed.