Afag CR 12, Перевод оригинальной инструкции по монтажу

Страница: 33 / 50

CR 12 - CR 16 - CR 20 - BA-vers.4.0 gb 20190630 33
3.2.8 Adjustment of the angle of rotation
1 Shock absorber
5 Clamping screw
1 Seal 6 Compressed air connection P1
(counterclockwise)
2 Stop sleeve 7 Compressed air connection P2 (clockwise)
8 Rotary flange
Procedure:
The exact adjustment of an end position depends on the stop sleeve, the shock
absorber and the compressed air.
Adjustment of the end positions
1. Compressed air connection at (P1): flange turns counterclockwise.
2. Loosen clamping of the stop sleeve by undoing the clamping screw 4.
3. Turn the forward and backward position of the stop sleeve 3 at the hexagon of
the stop sleeve until the end position is correct.
4. Compressed air connection at (P2): flange turns clockwise
5. Turn the forward and backward position of the stop sleeve 3 at the hexagon of
the stop sleeve until the end position is correct.
6. Tighten clamping of the stop sleeves by tightening the clamping screw 4.
2
1
3
8
5
6 (P1) 7 (P2)
4
3 Stop sleeve
4 Locknut