Afag CR 12, Перевод оригинальной инструкции по монтажу

Страница: 21 / 50

CR 12 - CR 16 - CR 20 - BA-vers.4.0 gb 20190630 21
3.1.4 Includes in the delivery
Pos. Quant. Description
1 2
Module
Shock absorber with lock nut and seal
2
3 2
2 Centering bushings7x3, (9x4 mm)
Special screw
3.1.5 Intended use
The series of the CR rotary module is used for the rotary movement of rigidly
mounted loads under the ambient and Installation conditions defined for this module;
see Technical catalogue.
NOTE
These Montage Instructions should be read carefully before
carrying out any activity on or with the module.
The module may only be deployed in accordance with the intended
use.
Modifications on the module that are not described in these
Montage Instructions or have not been approved in writing by Afag
are not permitted. In case of improper changes or assembly,
installation, operation, maintenance or repairs, Afag rejects all
liability.
CAUTION
Connection of compressed air and operation of pneumatic
systems may cause unpredictable movements which may
result in personal injury or damage to property.
When connecting compressed air for the first time make sure that all air throttles are
closed. Aerate the system slowly.