AETNAGROUP ROBOPAC TECHNOPLAT CS/CW, Руководство по эксплуатации и обслуживанию, Страница: 67 / 79

TECHNOPLAT CS/CW
TECHNOPLAT CS/CW TP
Every 200 hours
or 5000 cycles
∗
Lifting chains Greasing - See “Lubrication
point diagram”
Every 200 hours
or 5000 cycles
∗
Lifting chains Tensioning
check
Regulate See “Reel
carriage lifting
chain adjustment”
Every 200 hours
or 5000 cycles
∗
Table rotation
chain
Greasing - See “Lubrication
point diagram”
Every 200 hours
or 5000 cycles
∗
Table rotation
chain
Tensioning
check
Regulate See “Table
rotation chain
adjustment”
Every 200 hours
or 5000 cycles
∗
Reduction gears
and gearmotors
Lubricant
level check
1
Top-up with
a lubricant
of the same
kind if
necessary
see lubricants
table
Every 200 hours
or 5000 cycles
∗
Toothed wheels of
the carriage
drawing gears
Greasing - See “Lubrication
point diagram”
Every 2000 hours
or 10000 cycles
∗
Lifting chains Wear check - -
Every 2000 hours
or 10000 cycles
∗
Safety devices Efficiency
control
- -
Every 2000 hours
or 10000 cycles
∗
Table rotation
chain
Wear check - -
Every 2000 hours
or 10000 cycles
∗
Cutting thread Wear check If
necessary,
replace the
component
Contact the
technical
assistance
service
Every 5000 hours
or 50000 cycles
∗
Revolving table
wheels
Change - See “Replacing
rotating table
wheels”
Every 5000 hours
or 50000 cycles
∗
Carriage lifting
wheels
Change - -
Every 5000 hours
or 50000 cycles
∗
Reduction gears
and gearmotors
Replacing
the
lubricant
Use
lubricants
with the
same
characteris‑
tics
see lubricants
table
Non-routine maintenance
Every 5 years or
60000 cycles
∗
(Only for
machines version
TP or with
protection)
“Reset” Switch Change Change -
1
The reduction gears and gearmotors may be lubricated with either grease, oil, or for life.
Reduction gears and gearmotors that are lubricated for life do not need to be topped up and/or
replaced.
∗
The cycle-based frequency was defined according to the standard cycle.
The cycle considered standard is the following: top film reel 500 mm , top pallet 1500 mm , pallet
weight equal to 1500 kg , total wrapping time two revolutions at the top, two revolutions at the peak,
rotation speed 12 r.p.m , trolley up and down speed equal to 4 m/1' .
67/79