TECHNOPLAT CS/CW
TECHNOPLAT CS/CW TP
Presser assembly
version
Slide guide mast
H (mm)
Arm in normal
position H1 (mm)
Arm in normal
position H2 (mm)
Mechanical presser
2350
2200
750
"
2550
2400
750
"
2950
2800
750
"
3250
3100
750
6.21. REEL LOADING
Proceed as indicated:
1)
Insert film reel
(A)
in the proper housing
(B)
on the reel carriage.
2)
Disentangle the film and insert it in the rollers as shown in the diagram printed on the carriage.
|
Important
The dents on the carriage indicate the hot-melt gluing side of the film spool (inner or outer) with a dotted line.
3)
Collect some film
(C)
until a thin cord is obtained and make it pass in the conical area
(D)
of the rollers.
4)
Pull the cord outwards.
The film will automatically drop on the roller and cover it all along its height.
5)
Fit the end of the film tight in the eyelet
(E)
of the limit stop bracket on the turntable.
‒
On reel carriages type
"PVS"
, to allow
film unwinding, it is necessary to press
the roller rotation button
(F)
on the reel
carriage.
65/79
