AETNAGROUP ROBOPAC TECHNOPLAT CS/CW Скачать руководство пользователя страница 42

Страница: 42 / 79

TECHNOPLAT CS/CW

TECHNOPLAT CS/CW TP

5. INFORMATION ON ADJUSTMENTS

5.1. RECOMMENDATIONS FOR ADJUSTMENTS

‒

Before performing any operation, the authorised operator must make sure that he/she

understood the "Instructions for use".

‒

Before carrying out any intervention, activate all the safety de-vices provided, stop the

machine and assess if any residual energy is still present.

‒

Provide suitable safety conditions in compliance with the regulations on workplace safety to

prevent and minimise the risks.

‒

Pay attention to the SAFETY WARNINGS, do not use the machine for UNSPECIFIED

PURPOSES and assess the possible RESIDUAL RISKS.

5.2. ADJUSTING FILM "STRETCH"

Proceed as indicated.

5.2.1."PDS" TYPE REEL CARRIAGES (REPLACE THE DRAWING GEARS)

Proceed as indicated.

Stop the machine in safety conditions.

Remove transmission cover

(A)

Loosen the belt

(C)

through the

tensioner

(B)

Remove the belt from the pulley

(D)

Loosen the screws

(E)

Remove the disk

(F)

including the motor

and bearings.

42/79

Содержание ROBOPAC TECHNOPLAT CS/CW
















































































Результаты поиска

Содержание ROBOPAC TECHNOPLAT CS/CW

Отзывы:

Похожие инструкции для ROBOPAC TECHNOPLAT CS/CW

Бренды по названию

Популярные бренды

AETNAGROUP ROBOPAC TECHNOPLAT CS/CW, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание ROBOPAC TECHNOPLAT CS/CW

Отзывы:

Похожие инструкции для ROBOPAC TECHNOPLAT CS/CW

Бренды по названию

Популярные бренды