TECHNOPLAT CS/CW
TECHNOPLAT CS/CW TP
3.4. DESCRIPTION OF THE
ELECTRICAL DEVICES
The figure shows the positioning of the
devices on board of the machine.
A)
Gear motor: activates table rotation.
B)
Gear motor: activates movementof the
spool carriage.
C)
Carriage limit stop microswitch:activates
when the reelcarriage reaches the
minimumand maximum wrappingheight.
D)
Micro-switch: it stops the descentwhen
there are obstaclesunder the roll-holder
carriage.
E)
Photocell: detects the presenceand the
height of the loadto be wrapped.
G)
‘Load cell' sensor: it detects the tension
of the film and enables thespeed
variation of the pre-stretching rollers.
H)
Electric motor: it drives the pre-stretch
rollers.
L)
Sensor: enables the in phase stop of the
rotary table.
M)
Trolley lifting sensor: it defines the
position in which to stop the trolley to
start processing.
N)
Sensor: to detect the "open" position of
the arm.
|
Important
For further details see the electrical
diagram.
24/79
