TECHNOPLAT CS/CW
TECHNOPLAT CS/CW TP
4.4. HANDLING AND LIFTING
The machine can be moved with a forklift with suitable load capacity by inserting the forks in the points
indicated directly on the machine.
The transport and lifting equipment must be operated by an authorised person qualified to use the equipment
in question.
4.5. MACHINE INSTALLATION
The installation must take place in an area that has the requisites as set out in paragraph "Characteristics of
the installation area”.
If necessary, determine the exact position by tracing the coordinates and correctly position.
i
Danger - Warning
Authorised technical service personnel must perform installation and assembly operations.
Proceed as indicated:
1.
Insert the fork lift's forks in the specially
designed spaces provided in the base.
2.
Lift the machine from the load surface (if
present).
i
Danger - Warning
To perform the operation in safety, insert
some wooden spacers below the forks of
the lift truck and position all to the floor.
3.
Place the machine in the area assigned
for assembly.
|
Important
It must be placed on a smooth, level
surface for assembly.
4.5.1.ELECTRICAL BOX ASSEMBLY
Proceed as indicated.
1.
Cut the band
(A)
that holds the electrical wires together.
2.
Disassemble the fastening brackets
(B)
.
3.
Insert the electrical wires
(C)
inside the sliding shaft.
4.
Lift the electrical box
(D)
.
5.
Fasten the electrical box to the slide mast using the screws
(E)
.
35/79
