AES Dilumat S, Руководство пользователя, Страница: 56 / 73

DILUMAT S® MA108201-C
56
7.4 Dispensing
4. An initialization screen
appears when the device
is powered on.
A E S L a b o r a t o i r e
D I L U M A T S
V 1 . 1 2 b
5. Select a user code (1-99)
using the up/down arrows.
Then confirm the user
code.
2 6
6. The "Ready to dispense"
screen appears.
9 9 9 9 9 0 g 1 0 0 . 0 g
0 1
g
. 0 0 0
NOTE: The device retains the most recently used operating mode.
To change the operating mode, please refer to section 8.3.
Accessing the Functionalities:
Second Pump Option
If a second pump has been installed, it is possible to select the distribution pump.
Press the "Change Pump" key.
-
A left or right (< or >) cursor on the screen indicates which pump is currently
selected.
-
Pressing the key changes the pump.
-
There is a counter and a use parameter (dilution factor or volume to dispense)
for each pump, displayed at the top of the screen.
Verifies weighing (press
and hold)
See section 8.6.
Increases or decreases
the amount to dispense
Reprints / Re-exports the
last operating report
(if the printer or PC
connection is working)
Resets the sample’s bar
code (if a bar code reader
is installed)
Changes the pump
(if the 2
nd
pump option is
installed).
Holding down the
button resets the selected
pump’s counter.