AeroWorks STINGRAY ELECTRIC ARF, Инструкция по сборке

Страница: 17 / 41

TAIL SERVOS, STAB, AND
ELEVATOR ASSEMBLY
1. Gather the elevator and rudder servo and control
horn parts as shown below.
2. Attach a 12” servo extension to each of the
servos. Secure with safety wire, string, tape, or
other method. Ensure the plugs will not come
apart from vibration or light tension.
3. Attach an easy link to the elevator servo arm as
shown. Use a 2mm or 5/64 bit to drill out the
servo arm holes if necessary. Do not over tighten
the nut. The easy link must rotate freely in the
servo arm. Secure the nut with Lock Tite or a
small drop of CA glue.
4. Install the elevator servo in the servo hole on the
left side of the fuse with the servo output arm
pointing forward. Mark the location of the servo
mounting holes.
17