AeroWorks STINGRAY ELECTRIC ARF, Инструкция по сборке

Страница: 29 / 41

13. Install the tail wheel mounting plate using two
self tapping sheet metal screws provided.
14. Make a 90º bend 1/4” from the end of the wire
rudder pushrod.
15. Slide the nylon pushrod keeper on to the rudder
pushrod as shown below.
16. To help with alignment, tape the leading edge of
the rudder to the fin as shown. First slide the
pushrod through the servo arm easy link and then
install pushrod through the middle hole in the
control horn. Install the nylon pushrod keeper
onto the end of the pushrod as shown. Ensure the
servo arm is centered in the neutral position and
then tighten the easy link screw against the wire
pushrod.
29