36
Aeroworks 60cc Freestyle Extra 260 Assembly Manual
8. Install the silicone pipe supports and 4-40 bolts
with flat washer in pipe mounting bracket as
shown.
9. Use a drop of blue loctite to insure the bolts do
not come out from vibration.
10. Bolt tuned pipe mounting bracket to pre installed
blind nuts in fuselage.
11. Installed tuned pipe mounting bracket shown
below.
6. Remove covering over the precut air exit holes
as shown below.
7. Finished pipe air exit holes shown below.
Note:
Reseal all edges with a covering iron to
prevent fuel from soaking into the wood.
