20
Aeroworks 60cc Freestyle Extra 260 Assembly Manual
6. Mark location of the remaining base plate on the
rudder.
7. Use a hobby knife to carefully remove the cover-
ing. Take care not to cut too deep and damage
the wood underneath the covering.
8. Use 80 grit sandpaper to scuff the control horn
where it will pass through the rudder.
9. Use 80 grit sandpaper to lightly scuff the back of
the control horn mounting base as shown.
4. Place base plate against rudder and mark its lo-
cation with a ballpoint pen.
5. Slide the remaining base plate onto the opposite
side of the rudder control horn as shown.
