Aerohive HiveAP 20, Руководство по развертыванию

Страница: 47 / 80

Chapter 4 The HiveAP 340 Platform
46 Aerohive
H
IVE
AP 340 P
RODUCT
O
VERVIEW
The HiveAP 340 is a multi-channel wireless access point. It is compatible with IEEE 802.11b/g/n (2.4 GHz) and IEEE
802.11a/n (5 GHz) standards and supports a variety of Wi-Fi (wireless fidelity) security protocols, including WPA
(Wi-Fi Protected Access) and WPA2.
You can see the hardware components on the HiveAP in Figure 1 . Each component is described in Table 1 .
Figure 1 HiveAP 340 Hardware Components
Table 1 HiveAP 340 Component Descriptions
Component Description
Status LEDs The status LEDs convey operational states for system power, firmware,
Ethernet interfaces, and radios. For details, see
"Status LEDs" on page 52 .
Device Lock Slot You can physically secure the HiveAP by attaching a lock and cable (such
as a Kensington
®
notebook lock) to the device lock slot or by using the
lock adapter that is included in the mounting kit and a padlock. For more
information, see
"Locking the HiveAP 340" on page 57 .
802.11a/b/g/n RP-SMA Connectors You can connect up to six detachable single-band antennas to the male
802.11a/b/g/n RP-SMA (reverse polarity-subminiature version A)
connectors. Connect the longer antennas, which support 2.4 GHz
frequencies (for IEEE 802.11b/g/n), to the connectors on the side panel
with the Ethernet ports. Connect the shorter antennas, which support 5
GHz frequencies (for IEEE 802.11a/n), to the connectors on the side panel
with the device lock slot. For details, see
"Antennas" on page 52 .
îòì Ùئ øß÷ îòì Ùئ øÞ÷ îòì Ùئ øÝ÷ ÛÌØð ÛÌØï ìèÊ ÜÝ
øòêîëß÷
ÝÑÒÍÑÔÛ ÎÛÍÛÌ
ë Ùئ øß÷ ë Ùئ øÞ÷ ë Ùئ øÝ÷
Power
Connector
10/100 /1000
Mbps PoE Ports
Reset
Button
Console
Port
Device
Lock Slot
Status LEDs
802.11b/g/n RP-SMA Connectors for Detachable Single-Band Antennas
802.11a/n RP-SMA Connectors for Detachable Single-Band Antennas