RN200 Mono Software User Manual
41
Click "OK", and the marker setting will be valid. All markers will be displayed at the center
frequency of the test by default. When a marker is selected, its data will be displayed in the
2D graph.
On the top of the 2D graph, the user can change a marker’s location and data by modifying
the marker’s frequency or by searching the maximum or minimum values of the trace.
3.5.4 Network Test
Click the “Network” button under the VSA menu to enter the network test interface.
3.5.4.1
Parameter configuration
Name
Definition
Range
Frequency(MHz)
Test frequency
24000-44000
Start
Test start frequency
24000-44000
Stop
Test end frequency
24000-44000
Step
Test step
1-20000
Span
24000-44000
Center
Center frequency
24000-44000
Trace Name
Transmit and read data ports
IF Bandwidth
0.01-20000kHz
Power
-50~10dBm
Scale Auto
Y coordinate auto adjust
ON/OFF
Divisions
The number of ordinate divisions
4~30
Reference Position
The maximum value of Y ordinate
-100~30
Scale/Div
The value of each grid of the ordinate
0.01~100
Phase Offset
0-360
Frequency Offset
-20000~20000MHz
Table 13: Network Parameters
