RN200 Mono Software User Manual
23
Figure 24: Calibration Completed
After the calibration is completed, review the calibration data and check the correctness of
the data. If the data error is over the limit, the user can choose to re-calibrate the system. If
the data is acceptable, click the "Apply" button to upload the data. When the data applying is
completed, click "OK" to complete the calibration.
As shown in Figure 25, if the data applying failed, a warning message is shown, and the user
can choose to "reapply", "abandon" or "export" data.
•
Reapply: Upload the calibration data of Passive/Active_Tx to the device again
•
Abandon: Abandon the Passive/Active_Tx data of this calibration and close this pop-
up window.
•
Export: Export the data to a hard disk in CSV format, the user can re-upload the data
to the device via the importing function for “Calibration”.
