RN200 Mono Software User Manual
1
1
Introduction
1.1
Product Overview
The Mono OTA test software for the RN200 mmWave OTA test system is based on the .NET
Framework platform. It complies with 3GPP test standards and is kept up to date with the
test standard’s evolution. Mono software has wide applications; it can provide flexible
configurations, smooth running processes, and stable operations.
1.2
Product Functions
FUNCTION
TEST CASE
DESCRIPTION
Passive Test
Antenna pattern for 3/4
hemisphere
S21 amplitude and phase response
Active Non-signaling
Test
Tx test
Transmission antenna pattern, TRP, 3D
beam scan and spherical coverage,
spectrum test (OBW, SEM, ACLR) and
signal quality test (frequency error, LO
leakage, EVM, etc.)
Note: Tx signal can be a user-defined
arbitrary wave
Rx test
Receiving power level, receiving sensitivity
(DUT should support signal demodulation)
Note: system receives arbitrary signal from
DUT, then uploads data to PC for
data/algorithm analysis
RF Test
Spectrum analysis
Observe signal spectrum
Network analysis
S21 amplitude/phase response
Time domain analysis
Analyze time-domain signal from DUT
Others
Phased-array antenna
amplitude/ phase calibration.
Radar calibration, radar target
simulation
Upgradable
