RN200 Mono Software User Manual
24
Figure 25: Data Applying Failed
3.4.1.3 File Import
Import a local path loss file into the test software.
Click the "Import" button and select the correct file to import. If the file format or content of
is incorrect, the import will fail.
After the import is completed successfully, the new frequency points and corresponding path
loss data will be added to the original calibration data table, and the data of existing
frequency points will be overwritten.
Frequency
(MHz)
Theta Log
(dBm)
Phi Log
(dBm)
Theta
Phase (°)
Phi Phase
(°)
Header
Gain Max
(Δ)
Header
Gain
Middle (Δ)
Header
Gain Min
(Δ)
Table 6: Passive/Active_Tx Table Format
