Aero Easy Cover, Руководство по установке

Страница: 6 / 40

6
Easy Cover ®
Installation Instructions
Step 1b
Installing Tarp Housing inside Cab Shield

 


  



  

1) See Figure 3.
Hold mounting bracket (2) up to the cab shield. With angles as far forward as possible,
and level with top edge of cab shield, trace through holes with permanent marker. Repeat on other side of
cab shield.
2) See Figure 4.
Measure width of housing - dimension "A". Measure width inside of cab shield - dimension
"B". Subtract B from A and divide by two to get dimension "C". Turn tarp housing (1) upside down and
position steel angle until dimension C is maintained on both ends and mark in center of slotted hole. The
slotted holes allow the tarp housing to be moved 1/2" (once mounted) to the left or right if measurements
are not exact. Drill marked holes using 17/32" drill bit.
  

Index Description Qty
1 Tarp Housing 1
2 Mounting Bracket 4
3 Rubber Bushing 4
Index Description Qty
4 1/2-13 x 2 Hex Bolt GR5 8
5 1/2 Flat Washer 8
6 1/2 Nylon Hex Nut 8
Lip
Use angle as
template
Inside
radius
Drop
clearance
Distance same
on both sides
D.S. View
Figure 3
2
Mark in center
of slot
Figure 4
"C"
3/4"
"B"
"A"
1