Aero Easy Cover, Руководство по установке

Страница: 24 / 40

24
Easy Cover ®
Installation Instructions
Step 5a
Installing Undermount or Flange Mounted Spring Assembly


  
  




1) Mark the rear edge of the tarp housing or the mounting plate in line with
the tarp roll up bar on the driver's side and passenger's side. Mark these
points and call them (A).
2) Determine where you want the rear of the tarp to be when
it fully covers the box. Mark these points and call them
(C).
3) See Figure 28. Find a point at the side of the box that is
the same distance from A and C. This is point B, where
the spring assembly will be mounted. Mark this point on
both sides.
  


4) Position the driver's side spring assembly (1) to the
point marked on the driver's side (B). Clamp the spring
assembly into position centering the mounting plate on
point B. The top of the mounting plate should be as high
as possible from the bottom of the box.
5) See Figure 29. Drill four 13/32" holes using the mounting plate
as a guide.
6) Bolt the spring assembly to the box or rail with 3/8 - 16 x 1 hex
bolts (3), 3/8 fl at washers (4), and 3/8-16 nylon hex nut (5).
7) Repeat Steps 4 - 6 for passenger's side.
Index Description Qty
1 Flange Mounted Spring (driver side) 1
2 Flange Mounted Spring (passenger side) 1
3 3/8-16 x 1 1/4 Hex Bolt 8
Index Description Qty
4 3/8 Flat Washer 16
5 3/8-16 Nylon Hex Nut 8
#
$
$
%
Figure 28
5RTKPI$TCEMGV
%TQUUOGODGT
%TQUUOGODGT
Figure 29
3
Figure 27