Aero Easy Cover, Руководство по установке

Страница: 22 / 40

22
Easy Cover ®
Installation Instructions
Step 4f
Installing the Optional Electrical Controls with Rotary Switch
 

1) Open and layout all electric hardware parts.
2) See Figure 25. Peel decal (4) and place on the mounting bracket (3).
Index Description Qty
1 Rotary Switch 1
2 Circuit Breaker 40 Amp 1
3 Mounting Bracket 1
4 Decal Rotary Switch 1
5 Clamp Metal Loom Plastic Coated 12
*6 Wire #6 Duplex Varies
7 Wire Butt Connectors #6 4
8 Wire End #6 x #10 Ring Terminal 6
Index Description Qty
9 Wire End #6 x 1/4 Ring Terminal 2
10 Wire End #6 x 3/8 Ring Terminal 2
11 1/4 x 3/4 Pan Head Phillips 12
12 1/4-20 x 3/4 Hex Head Bolt 2
13 1/4 Flat Washer 4
14 1/4-20 Nylon Hex Nut 2
15 Wiring Diagram 1
Gearmotor
Wire End
(2)
1/4" x #6
Plate
B2
Switch
Switch
Rotary
Battery
Truck
A2
B1
A1
B1
B2
A2
A1
Backview of Rotary Switch
Figure 25
    

3) Mount a weather proof box outside the cab and mount the rotary switch (1) inside the box. Using the
mounting bracket (3) as a template, mark and drill two 9/32" holes.
4) Attach mounting bracket (3) using (2) 1/4-20 x 3/4 Hex bolts (12), (4) 1/4 fl at washers (13), and
(2) 1/4 Nylon hex nuts (14).
5) Remove the switch handle and fasten nut from the rotary switch (1). Pass the rotary switch's operating shaft
through the hole in the mounting bracket (3) from behind the plate. Replace the nut and tighten it to secure
the switch to the mounting bracket. Replace the handle.