Aero Easy Cover, Руководство по установке

Страница: 11 / 40

11
Easy Cover ®
Installation Instructions
Step 2c
Installing Manual Adjustable Roll Up Bar

 
1) Remove hardware package and tape from center of adjustable manual roll up bar, one end is loose and can
slide off. Place hardware package to the side.
2) One end of adjustable manual roll up bar has a shaft with a hole, insert this end through the bearing on the
driver's end of tarp housing.
3) Make sure driver's end of roll up bar is against bearing. Extend other end of roll up bar out and insert shaft
through the bearing on the passenger's end of tarp housing.
  

4) See Figure 11. With passenger's end of roll up bar within 1/4" - 1/2" of bearing drill two .257" (F drill) holes
thru both tubes as shown.
5) Secure outside tube to inside tube with two 1/4 x 2 1/4 Hex Bolts from hardware pack.
Index Description Qty
1 Adjustable Manual Roll Up Bar 1
2 1/4-20 x 2 1/4 Hex Bolt 2
3 1/4-20 Nylon Hex Nut 2
.25
.75 5.00
Figure 11
.257" diameter (F Drill)
Thru both tubes
2 places
2 3
Flush against bearing
1