Aero Easy Cover, Руководство по установке

Страница: 31 / 40

31
Easy Cover ®
Installation Instructions
Step 6a
Installing the End Fitting and Steel Lower Swing Arm

 
1) See Figure 39. Place swing arm lower (3) onto
casting and secure with
5/16-18 x 2 1/4 hex bolt
(4)
and
5/16-18 nylon hex jam nut (5)
.
2) See Figure 39. Place a end fi tting (1) on the driver's
side tension spring assembly shaft so it is facing the
rear.


 




3) See Figure 39. Drive 1/4" spring pins (2) into the
end fi tting (1) and thru the shaft.
4) Repeat for opposite side.
  








 

Figure 39
5
2
4
1
3
Index Description Qty
1 End Fitting 1
2 1/4" Spring Pins 4
3 Swing Arm Lower Steel 2
4 5/16-18 x 2 1/4 Hex Bolt 4
5 5/16-18 Nylon Hex Jam Nut 4
Facing Down
Facing Up
Figure 40