aero-stream AS1000-2 Скачать руководство пользователя | Manualshive

Страница: 3 / 38

background image

3

© Aero-Stream, LLC 2022

102822 Rev. H

Classification

AS450-2, AS500-2, AS600-2, AS750-2, AS1000-2, AS1500-2 systems meets all requirements of NSF
40 Class I.

Support

System operation and maintenance must be performed by an authorized service. Property owners must
contact the authorized service provider the front cover of this guide, or Aero-Stream at 877-254-7093.

Permits

All system designers, installers and service providers must be Aero-Stream certified. Training is
available on a regular basis through Aero-Stream, LLC. Prior to the installation of the product, the
certified installer must obtain any and all required state and local permits. The installer must strictly
comply with all pertinent state and local requirements. Failure to comply with these requirements is a
violation of state and municipal codes.

Proper Use

The AS450-2, AS500-2, AS600-2, AS750-2, AS1000-2, AS1500-2 systems are designed to treat
residential strength wastewater. This includes human waste and moderate amounts of typical
household cleaning products. See Best Septic System Practices section of this manual for proper
wastewater system use.

Read and Keep This Manual

Property owner to be given one manual for their records. Retain this manual for warranty purposes.
Completely read these instructions before starting the installation.

Overview of AS450-2, AS500-2, AS600-2, AS750-2, AS1000-2, AS1500-2
System and Terminology

The Aero-Stream AS450-2, AS500-2, AS600-2, AS750-2, AS1000-2, AS1500-2 systems use an
aerobic process to treat the wastewater prior to dispersing into an absorption component. Aero-Stream,
AS450-2, AS500-2, AS600-2, AS750-2, AS1000-2, and AS1500-2, Bio-Brush, & Aero-Alert are
trademarks of Aero-Stream, LLC.

The air compressor delivers a constant flow of air through the air line to the diffuser(s).  The diffuser
assembly is installed in the center of a Bio-brush cluster.  The diffuser breaks the air flow into micro-
bubbles that allow oxygen to be dissolved into the water as the air bubble stream rises to the surface.

The Bio-brush clusters provide a media for attached growth bacteria.  The attached growth bacteria
stabilize the system during shock loading.  The Bio-brush clusters also filter particulate matter from the
mixed liquid.

Residual dissolved oxygen and suspended growth aerobic bacteria exit the tank through the outlet
baffle and pipe and enter the drain field, trenches, or mound.  The dissolved oxygen allows aerobic
bacteria to live in the drain field, trenches, or mound and further clean the wastewater.

An effluent filter (if required by local or state codes) in the outlet baffle prevents large objects from
entering and clogging the outlet pipe.

«
1
2
3
4
5
...
»

Содержание AS1000-2







































Отзывы:

Нет отзывов

Похожие инструкции для AS1000-2

Бренд: Quooker Страницы: 12

Бренд: BMB Technology Страницы: 9

Бренд: Viking Страницы: 11

Бренд: Hama Страницы: 22

Бренд: PlasmaMade Страницы: 48

CENTRAL Omega HEC-12 PRO Prohibitor

Бренд: Tyco Fire Product Страницы: 4

Aqua Flex T 1000

Бренд: BWT Страницы: 28

Бренд: Zodiac Страницы: 16

Бренд: RAINSHOWER Страницы: 2

Filtral 1500 UVC

Бренд: Oase Страницы: 20

Бренд: Conergy Страницы: 36

Бренд: Viqua Страницы: 21

Бренд: Selecto Страницы: 3

Бренд: HYTECON Страницы: 52

Бренд: WaterCop Страницы: 8

Бренд: Culligan Страницы: 4

Бренд: Culligan Страницы: 8

Бренд: Culligan Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды