AEQ
TALENT
79
E9. A call has been established with the studio. They can hear me but I can’t hear myself.
Many studios don’t return audio in order to avoid talker’s confusion due to the back and forth
delay. In this case, you can configure TALENT to provide you with "local feedback" directly from
your microphone to your headphones, so you can hear yourself without delay. In order to do
this, activate the "MIC" source in your headphone output using "AEQ ControlPHOENIX" mixer
or "AEQ TALENT PILOT" output audio adjustments. Alternatively, if PROG is selected as one of
the sources for your headphones (this will usually be the case, as you want to hear studio
return), you can adjust the "TX/RX PANORAMA" slider to provide some program-go feedback
(TX) to your headphones. You can also do this from TALENT’s front panel by pressing the left
encoder button and then turning the knob to the left until you get the desired feedback level.
E10. I want to make a phone call to an interviewee and want to send it to the studio.
In order to do this, first of all pair
Bluetooth
audio. See section 6.5.
Next, make sure that your MIC is sent to LINE OUT/BT (you can
simply long-press the right encoder and its associated red light
will become illuminated).
Adjust Bluetooth send level by briefly pressing the same encoder (its
associated yellow light will become illuminated) and adjust the
sending level with the knob.
We recommend a moderate value of Line OUT/BT output level, below 0dB
to avoid saturating the terminal so your remote peer can hear you clearly.
On the other hand, you have to make sure that LINE IN is routed to the headphones (if you
want to hear the remote peer), or, additionally, that LINE IN is ON AIR when you are ready to
send the interviewee voice to the program.
Remember that you can control whether Bluetooth incoming audio is sent to program
by means of a long pressing of the left encoder (the associated red light will become
illuminated to indicate that this input is ON AIR).
For advanced applications like this, it is always useful to have "AEQ ControlPHOENIX" mixer or
audio adjustments in the App open to check the send/receive listening levels properly.