AEQ
TALENT
55
7.
A user ID and password are requested (by default, both are
aeq
). After you have
correctly entered these two items, the firmware upgrading screen will be displayed.
Firmware upgrading screen detail
8.
Check to see whether the versions displayed are the same as the firmware that is
currently in effect. If they do not match, upgrade the firmware as indicated below.
9.
Select the module you want to upgrade in "Upgrade" column.
NOTE:
Each upgrading
file is specifically designed to upgrade a specific module within the unit: CPU, DSP or
FPGA.
10.
In "
Select file
" enter the access route to the upgrade file containing the new firmware
version, using the "
Seleccionar archivo
" button.
11.
Press the "
Upgrade
" button found in the lower part of the screen.
12.
Wait for on-screen confirmation that the operation has been successfully completed.
13.
In the Internet browser, go to the
UPGRADE
section and ensure that all the firmware
versions installed in your codec are now the correct ones.
14.
Power the unit down.
7.2. Configuring the IP parameters and the MAC address associated with the Ethernet
interface.
From this menu the IP parameters and the MAC address associated with the Ethernet interface
can be edited. Because of the consequences the MAC address configuration could have, this
action should only be carried out if the codec use situation requires it; the editing should be
performed by highly qualified personnel or under the supervision of AEQ authorized technical
services, and always in possession of the required network information.
1.
From
CONFIGURATION
ETHERNET
, check the IP address associated with the
Ethernet interface.
2.
Power down the TALENT.
3.
Connect TALENT to the PC from which you are going to perform the upgrading process
using a crossed cable.
4.
Power up the TALENT.
5.
Open the Internet Explorer web browser and, in the address bar, enter HTTP://<IP
address obtained in point 1>. Press ENTER and the main screen will be displayed.
Selecting the
MAINTENANCE
option will enable you to modify the IP parameters and
the MAC address of the Ethernet interface of the unit.
