AEQ
TALENT
58
For more information, please consult section 4.7 of this manual and section 6.5.1 of "AEQ
ControlPHOENIX" application manual.
7.7. Remotely rebooting the equipment.
Sometimes a remote unit can work abnormally or become unreachable by the remote control
software as a result of a communications error or in the unit itself. A method has been
developed in order to remotely reboot the audiocodec, so normal operation is recovered.
Inside MAINTENANCE, at the bottom of the screen, you can find "
SYSTEM REBOOT
" section.
By clicking on "
Reboot
" button, an information dialog will appear warning that the equipment is
being rebooted and it will be disconnect for some seconds after acceptance ("Resetting
system... please wait a few seconds before connecting again").
Reboot screen detail