Power Quality Analyzer PowerPad
®
IV Model 8345
43
4.3 CONFIGURATION
Before making any measurement, remember to specify:
■
The connection type (§ 3.4.2)
■
The current sensors, the voltage ratio, and the current ratio (§ 3.4.3)
■
The calculation method, if necessary (§ 3.4.1)
For the recording modes, remember to specify:
■
The quantities to record
■
The recording’s start time
■
The recording’s duration
■
The recording conditions
4.4 CONNECTIONS
1. Ensure that the leads and sensors are correctly color-coded (see § 2.9).
2. Then, connect them to the circuit as shown by the following screens.
4.4.1 Single-Phase Network
4.4.2 Split-Phase Network
