Power Quality Analyzer PowerPad
®
IV Model 8345
23
For
Server address
, select the server address to connect to the instrument
For
Server port
, enter the server port number to connect to the server
address (up to 5 numbers)
The
Device name
is the device's serial number. It is used by the IRD server
to connect to the device and cannot be changed.
For
Password
, enter the password that will be needed to communicate with
the instrument. The password can be up to 30 characters long and include
upper- and lower-case letters (A-Z), numbers (0-9), and a variety of symbols
Enter the instrument’s identification and password to control it from a PC
3.3.6 Updating the Embedded Software
As updates for the 8345 become available, you are able to update the
embedded software via the update screen.
Press
in the instrument configuration menu to open the update screen
for the embedded software
Refer to § 18.5 for more information about the firmware updates
When the instrument locates updated software, the instrument will display
information about the updated version and ask if you would like to install it.
For example, if the SD card has an update, the instrument will locate it and
display the following screen.
1.
Restart the instrument to reboot in a mode specific to the software update.
2. If it does not automatically reboot in the correct mode, turn the instrument
off, and restart it while holdi
ng the and buttons until you see the
screen shown below.
