Power Quality Analyzer PowerPad
®
IV Model 8345
17
3.3 CONFIGURING THE INSTRUMENT
Except for the display and language, the instrument’s configuration
cannot be changed if the instrument is recording or metering energy,
recording transients or alarms, or capturing an inrush current.
3.3.1 Language
1. Press
on the setup screen to enter the language selection screen.
2. Use the navigation buttons or touch screen to highlight the language for
your instrument.
3.
To confirm the selected language, use the
button or the touch screen to
select the desired language option.
Refer to § 1.6 for more information.
3.3.2 Date and Time
Press to set the date and time
♦
Press to choose from
73 available time zones
For
Time source
, choose between NTP server, GPS, and Manual for your
desired method to set the date and time
For
Date/Time
, enter the date and time if on Manual mode; otherwise, this
field is grayed out and view only
For
NTP server
, enter the NTP server address that you would like to use to
set the date and time
For
Date format
, select your desired date format from MM/DD/YY,
DD/MM/YY, and YY/MM/DD
For
Time format
, choose whether to display time in 12 h or 24 h format
For
Daylight Saving Time
, check the box to apply Daylight Saving Time
