AEMC instruments 2136.35 Скачать руководство пользователя страница 123

Страница: 123 / 144

Power Quality Analyzer PowerPad

IV Model 8345

115

18.4 MEMORY CARD

The instrument accepts type SD (SDSC), SDHC, and SDXC memory cards.

Lock the memory card when you remove it from the instrument

Unlock the SD card before putting the card back into the instrument

1.  To remove the memory card from its slot, open the elastomer cap.
2.  Press down on the SD card and release to remove it from its slot.
3.  To put the card back in place, insert the card into the slot until you feel it

click. The red indicator will light up.

4. Then, put the elastomer cap back in place.

18.5 UPDATING THE FIRMWARE

To provide our customers the best possible service for performance and

technical upgrades, AEMC

Instruments offers free software and firmware

updates on our website.

You can perform the update a few different ways.

Connect the instrument to your

PC using

an Ethernet cord. Make sure that your

PC has internet access

Copy the update file to a USB drive.

Then, insert the USB drive into the

instrument’s USB port

Copy the update file to an SD card.

Then, insert the SD card into the

instrument’s SD card slot

To install the update, refer to § 3.3.6.

The firmware update depends on its

compatibility with the instrument’s hardware

version. The version is in the instrument

configuration, as explained in § 3.3.7.

When the firmware is updated, all data is erased; therefore, save any

data that you want to keep to a PC using the application software

before updating the firmware.

Locked memory card

LOCK

Unlocked memory card

LOCK

Содержание 2136.35

















































































































































Результаты поиска

Содержание 2136.35

Отзывы:

Бренды по названию

Популярные бренды

AEMC instruments 2136.35, Руководство пользователя

Результаты поиска

Содержание 2136.35

Отзывы:

Бренды по названию

Популярные бренды