AEMC instruments 2136.35 Скачать руководство пользователя страница 23

Страница: 23 / 144

Power Quality Analyzer PowerPad

IV Model 8345

3. CONFIGURATION

The configuration screen allows you to set up specific configurations for the

instrument’s parameters and every measurement mode.

Press the

button to access the configuration screen

Press the

button to configure the measurements

Press the

button to configure the instrument

You must configure your instrument before use.

3.1 NAVIGATION

The 8345’s screens are available using the navigation buttons or touch screen.

To configure the instrument, use the navigation buttons (◄, ►, ▲, ▼) or the

touch screen to select and modify the parameters.

2. Use the

button to confirm the highlighted selection.

3. Use the

button to cancel or to return to the previous screen.

If you are wearing gloves, we recommend using the navigation buttons instead

of the touch screen.

3.2 USERS

The 8345 allows three different users to configure the instrument and

measurements. The configuration for each user profile is saved, so multiple

users can use the 8345 without reconfiguring the instrument for each user.

1. Press

to access the user profiles.

Содержание 2136.35

















































































































































Результаты поиска

Содержание 2136.35

Отзывы:

Бренды по названию

Популярные бренды

AEMC instruments 2136.35, Руководство пользователя

Результаты поиска

Содержание 2136.35

Отзывы:

Бренды по названию

Популярные бренды