manualshive.com logo in svg

AEMC instruments 2136.35, Руководство пользователя

Поделиться
Скачать
AEMC instruments 2136.35 Скачать руководство пользователя страница 12

4 

Power Quality Analyzer PowerPad

®

 IV Model 8345

1.5 CHARGING THE BATTERY

Before using the instrument, you must fully charge the battery.

1. 

Remove the plastic film preventing the connection between the battery and 

instrument. To do this, refer to § 18.3, which explains how to remove the 

battery from the instrument.

2.  Connect the power cord to the power supply unit.
3.  Plug the power cord into an outlet.
4.  Open the elastomer cover that protects the power socket.
5.  Connect the power supply’s 4-point connector to the instrument.

The ON/OFF button   will blink while charging, and the display unit will indicate 

the charging status.
When the battery is fully depleted, the charging time is approximately 6 hours.
The ON/OFF button   will glow steady green when the battery is fully charged.

1.6 CHOOSING A LANGUAGE FOR THE DISPLAY

You must choose a language for the display before using the instrument. The 

8345 has more than 20 languages available to choose from.

1.  Press the ON/OFF button 

 to turn the instrument on.

2. 

Press the configuration button 

.

3.  Press the second yellow function button  .
4.  Then, press 

 to open the language menu.

5.  Choose your desired language from the list that appears.

120 V ± 15 %, 60 Hz

230 V ± 15 %, 50 Hz

Содержание 2136.35

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды