Chapter 2 — Getting to Know the DWR-10
Page 22
September 2004
•
Select a tap or winding field, or press the
Tap/Winding
button.
•
Press the
Save
button when the serial number field is
still blank.
To enter or modify data using the keyboard toolbar:
1. Turn and press the knob to select a field on the
screen. This action clears the field of any pre-existing
data and opens the keyboard toolbar. The
End
button
on the keyboard also becomes active.
2. Use the knob to highlight individual letters and
numbers on the keyboard.
•
Turn the knob clockwise to travel from
A
to
End
on the keyboard, and counter-clockwise to travel
in reverse from
End
to
A
.
•
When the knob highlight reaches the end of the
keyboard (or the beginning), it automatically
cycles back to the
A
(or
End
) button.
3. Press on a highlighted letter or number to enter it in
the activated field.
•
Press the
CAP
button to enter all text in capital
letters.
•
Enter a space by pressing the
Space
button.
•
If you make a mistake while entering data in a
field, press
Backspace
(
Å
), select the character
to delete, and press.
•
Delete an entire field by pressing
Clear Field
.
All manuals and user guides at all-guides.com