ADWEL DRM-100, Руководство пользователя, Страница: 15 / 39

Chapter 2 — Getting to Know the DRM-100
Page 6
Item Description
Down
Arrow
button
Down Arrow button is used to decrement value of
selected field of current or time. The current can be
decremented in steps of 10A. The time can be
decremented from in steps of 1 second.
START/
STOP
button
The START/STOP push button is bigger than other
three and has a symbol of a set of contacts on it. It
is used to START and STOP the test. When this
button is pressed the output current ramps up over
2 to 3 seconds, holds at the selected current value
and then ramps down to zero over 2 to 3 seconds.
This cycle constitutes the complete timed test
sequence. When the test current reaches the
selected value, the instrument shows the
measured value of resistance. If this button is
pressed in the middle of the test sequence, the
instrument will ramp down the current to zero in 2
to 3 seconds
Current Receptacles
At the top right corner of front panel are two, larger black
and red current sockets. They are marked with positive
and negative symbols and Current Output description.
They are sockets for the current test leads and provide
current output (selected under I-SET field).
Voltage Receptacles
Next to current output receptacles are voltage input
sockets in black and red color. They marked with positive
and negative symbols and resistor symbol. They are
sockets for the potential leads