Advanticsys MPC-143, Руководство пользователя

Страница: 21 / 31

1.3
Page 21
MPC-
143. User’s Manual
7
"Archives" tab
The MPC-143 has an internal 8MB flash memory. In case, the device is used as
datalogger, the following steps must be done:
o
Go to Archives>Configuration
o
In "Storage parameters" frame, configure the following:

"Period": It defines storage interval. Internal memory is
organized in different blocks depending on the devices
nature which are connected to the MPC-143.
Figure 19
. “Archives” tab. Storage frequency configuration

In case user needs to customize storage blocks, signals
acquisition must be configured accordingly. Memory block
used will be defined as "User Archive" (see next step).
o
Go to Archives>User Archive Configuration
o
Under this tab, user can configure datalogging following his own
requirements. In the next pages, a configuration example is given
by setting the following parameters:
 “Count of parameters”
: number of registers to be stored.
 “Register”
: Specific register to be stored.
NOTE: Timestamp is registered automatically.