1.3
Page 11
MPC-
143. User’s Manual
6
“Communication” tab
6.1 Communication > GPRS
As previously described, MPC-143 can be configured through a GPRS link. In order to do
so, user must enable GPRS connection as shown below. Then, click on "
Set
" button in
order to save changes.
Figure 9.
“GPRS” Tab. Enabling communication
Within this tab, different services can be configured or checked.
1. GPRS connection paramete1`rs:
o
"APN": access point name provided by Internet Service Provider (ISP).
If needed by ISP, credentials can also be configured here:
o
"Username": provided by ISP.
o
"Password": provided by ISP.
NOTE: After configuration is completed, click on "
Set
" button in order to save changes.
2. Connection status. Once GPRS connection is established, status will be shown
as below:
Figure 10.
“GPRS” tab. Connection status
Содержание MPC-143
Страница 1: ...MPC 143 User s Manual 1 3 11 11 2016...
