manualshive.com logo in svg

ADVANTEST R3267 series, Руководство по эксплуатации, Страница: 184 / 398

Поделиться
Скачать
ADVANTEST R3267 series Скачать руководство пользователя страница 184

R3267 Series Spectrum Analyzer Operation Manual (Vol.1)

2.4.6 Setting the Screen Label

2-147

9.

Press RETURN.
The Date/Time dialog box is closed.

2.4.6

Setting the Screen Label

This section describes how to enter your remarks for the screen data. A maximum of 30 characters, which
consist of alphanumeric and a few special characters, can be entered.

Setting labels

1.

Press FORMAT, Label and Label Entry.
The Label Entry dialog box, which is used to enter alphanumeric characters and
special characters, is displayed. This dialog box consists of the two areas: one is
the area in which characters entered are displayed, and the other is the area in
which the alphanumeric characters to be entered are displayed as buttons.(See
Figure 2-160).

Figure 2-160 Dialog Box Used to Enter Labels

2.

Select the characters you wish to enter using the data knob and step keys.
The data knob is used to move the cursor horizontally in the button area; the step
keys are used to move the cursor vertically between the rows in the button area.
In this example, enter ADVANTEST1 using upper case alphabetic characters.

3.

Move the cursor to character A, which is found on the first line, and press the data
knob.
Character A will be displayed in the input area within the dialog box. Note that
the cursor in this area has been shifted one place to the right.

4.

Select character B and press Hz. Then press -(BS). Character B appears tempo-
rarily in the upper part and disappears when it is corrected by pressing -(BS).
Note that the cursor is next to character A on the right hand side.

5.

Then enter the rest of the characters: D, V, A, N, T, E, S and T.

Содержание R3267 series















































































































































































































































































































































































































Отзывы:

Нет отзывов