R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
2.4.1 Saving/Recalling Measurement Conditions
2-132
7.
Select Normalize and set this function to A/B.
The function that saves data for traces A and B is set.
8.
Select Limit Line and set this function to 1/2.
The function that saves data for Limit lines 1 and 2 is set.
9.
Select LOSS: Freq and turn this function ON.
The function that saves data in the LOSS:Freq table is set.
10. Select Corr Factor and turn this function ON.
The function that saves the level correction value is set.
11. Press RETURN.
This closes the Save Item Setup dialog box and returns to the Save menu.
Setting a file to be saved
12. Select the file to be saved from a file list.
Use the data knob to select the file.
The file name is previously assigned. For RAM, the file name starts with
REG_01; for floppy disks, it starts with FILE_001.
NOTE:
In the above example a file number is used instead of a file name, but you
can use an arbitrary file name if desired. For information on how to set file
names, refer to Section 2.4.6.
Saving data
13. Press Save File and Save.
The data is saved in the file previously selected (See Figure 2-147).
Figure 2-147 File Saved