Advanced Quick Zone XL, Инструкция по установке, пусконаладке и эксплуатации

Страница: 2 / 68

0832-CPD-2177
13
EN54-2: 1997 +A1:2006
Control and indicating equipment for fire detection and fire
alarm systems for buildings
Provided options:
-
Outputs to Fire Alarm Devices
- Investigation Delays to Outputs
- Dependency on more than one alarm signal
- Test Condition
EN54-4: 1997 +A1:2002 +A2:2006
Power supply equipment for fire detection and fire alarm
systems for buildings
QZXL-4, QZXL-8, QZXL-12
IMPORTANT NOTE
PLEASE READ THIS MANUAL BEFORE HANDLING THE EQUIPMENT AND OBSERVE ALL ADVICE GIVEN
IN IT
THIS PARTICULARLY APPLIES TO THE PRECAUTIONS NECESSARY TO AVOID E.S.D!
ATTENTION
IMPORTANT SAFETY NOTES
The panel is safe to operate provided it has been installed in compliance with the manufacturer’s instructions
and used in accordance with this manual.
Hazardous voltages are present inside the panel
—DO NOT open it unless you are qualified and authorised to
do so. There is no need to open the panel’s enclosure except to carry out commissioning, maintenance and
remedial work. This work must only be carried out by competent service personnel who are fully conversant with
the contents of the panel’s installation manual and have the necessary skills for maintaining this equipment.
This fi re alarm system requires periodic checks as specified in BS 5839 Part 1 It is the responsibility of the
system user to ensure it is regularly serviced and maintained in good working order.
Disclaimer
No responsibility can be accepted by the manufacturer or distributors of this fire alarm panel for any
misinterpretation of an instruction or guidance note or for the compliance of the system as a whole. The
manufacturer’s policy is one of continuous improvement and we reserve the right to make changes to product
specifications at our discretion and without prior notice. E & O E.
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE DEVICES
544b/02
www.acornfiresecurity.com
www.acornfiresecurity.com