Advanced Quick Zone XL, Инструкция по установке, пусконаладке и эксплуатации

Страница: 23 / 68

23
4.4 OPTIONS INDEX
The following programmable options and settings are available.
Option/Setting Description Code(s) Page
View History View the last 40 events 1111 24
Set Fault Buzzer Volume Set the fault buzzer volume to high or low 2224 25
Clear All Disablements Remove all disablements which have been set for
any zone, sounder circuit, output or delay 1121 25
Initialise Factory Settings Restores all programming, test modes and
disablements back to factory default settings 1113 25
Panel Wide Settings
• Change/remove keypad access code
• Set quantity of repeater panels on system
• Set panel delay time
• Disable battery monitoring
• Set panel internal PCB config (adding additional
zone cards or repeater comms PCB)
• Set repeater comms monitoring type
2123 26-29
Zone Function Settings
• Set zone to latching or non-latching
• Set zone to old B.S (short circuit = fire)
• Set zone for use with MTL5061 I.S. barrier
• Set zone to silent mode (provides visual & audible
indication at the panel but no sounder operation)
• Turn off priority alarm feature for zone
• Turn off detector removal monitoring for zone
• Set detector removal monitoring type for zone
(Schottky or Zener diode detector bases)
3121 30-31
Dependency Mode Set panel & zones to dependency mode A, B or C 2114, 2124, 2134 32-34
EN54 Sounder Resound
Options Set zones to not resound alarms after an initial fire
condition 1114 35
Delays to Outputs Apply delays to outputs in response to selected
zones 2323 36
Input Functions Change the default functions of the Class Change
and Alert inputs 4141 37
Output Programmability &
Miscellaneous Set panel outputs to be programmable, switch on
fault latching, invert fault output 4142 38
Output Zonal Response Set how each output or sounder circuit responds for
each zone (off, continuous or pulsing) 4242, 3122, 4342,
4243 39-41
Zone of Origin Setting Quick set codes for zone of origin or zonal sounder
ringing for Twin Wire sounder circuits 3311, 3312 41
Output Functional
Options
Change the default output responses to ‘Silence
Alarms’, ‘Evacuate’, ‘Class Change’, ‘Alert’ and
‘Delay’
3123, 4244, 4343,
4344 42-44
System Diagnostics Mode Tests system PCB config setup for fault diagnosis 3114 45
Repeater Programming Repeater panel setup & programming 4443 46-47
www.acornfiresecurity.com
www.acornfiresecurity.com